SHORT COURSES
RIIWHS204E - Work safely at heights
Overview
This unit describes the skills and knowledge required to work safely at heights in the resources and infrastructure industries.
It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.
Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.
Note: The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented RTOs are advised to contextualise the unit of competency by referring to the existing State/Territory OHS legislative requirements.
Course Details
-
Course Location: Shed 1 / 5 Thomas Lane, Moranbah
-
Duration: 1 day
-
Course Times: Start at 7:00am
-
Assessment Type: Theory and Practical
If you are unable to attend due to illness, we will require a doctor's certificate/clearance to be able to reschedule your course. If you are unable to provide a doctor's clearance/certificate, then you may need to pay for your course again.
Students who are deemed competent will be issued a Statement of Attainment (SOA) by Queensland Training & Development Pty Ltd – RTO # 32238 or Dawson's Training - RTO # 32461.
Prerequisites:
-
A short literacy and numeracy test may be required
What to Bring
-
Government Issued Photo ID
-
Enclosed shoes
-
Suitable outdoor work clothing (no singlets)
-
Lunch and water bottle
-
USI Number (Forgot My USI)
RIIWHS202E - Enter and work in confined spaces
Overview
This unit describes the skills and knowledge required to enter and work in confined spaces in the resources and infrastructure industries. It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.
Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.
Course Details
-
Course Location: Shed 1 / 5 Thomas Lane, Moranbah
-
Duration: 1 day
-
Course Times: Start at 7:00am
-
Assessment Type: Theory and Practical
If you are unable to attend due to illness, we will require a doctor's certificate/clearance to be able to reschedule your course. If you are unable to provide a doctor's clearance/certificate, then you may need to pay for your course again.
Students who are deemed competent will be issued a Statement of Attainment (SOA) by Queensland Training & Development Pty Ltd – RTO # 32238 or Dawson's Training - RTO # 32461.
Prerequisites:
-
A short literacy and numeracy test may be required
What to Bring
-
Government Issued Photo ID
-
Enclosed shoes
-
Suitable outdoor work clothing (no singlets)
-
Lunch and water bottle
-
USI Number (Forgot My USI)
MSMWHS217 - Gas test atmospheres
Overview
This unit of competency covers the skills and knowledge required to test the working atmosphere, using electronic test apparatus, to find out if it is safe for the proposed work.
It applies to situations where an individual may be required to carry out gas testing of an atmosphere prior to entering a specific area or workspace. The competency requires the person to interpret readings and take actions based on the interpretation.
Working environment may be hazardous, unpredictable, subject to time pressure, chaotic and expose responders to risk, on land or water, by day or night. Workplace atmospheres may include visible and invisible hazards and hazardous surfaces.
The unit is suitable for use in the following situations:
-
confined spaces
-
enclosed and partially enclosed spaces
-
hot work
-
storage tanks, silos, pits, pipes, shafts, ducts, transport vehicles and ships
-
testing as part of issuing a work permit
-
monitoring as part of working under a work permit
-
open areas
-
holding the gas tester by hand
-
lowering the gas tester into a space, e.g. on a line.
This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members and the control room operator, as appropriate.
No licensing, legislative or certification requirements apply to this unit at the time of publication
Course Details
-
Course Location: Shed 1 / 5 Thomas Lane, Moranbah
-
Duration: 1 day
-
Course Times: Start at 7:00am
-
Assessment Type: Theory and Practical
If you are unable to attend due to illness, we will require a doctor's certificate/clearance to be able to reschedule your course. If you are unable to provide a doctor's clearance/certificate, then you may need to pay for your course again.
Students who are deemed competent will be issued a Statement of Attainment (SOA) by Queensland Training & Development Pty Ltd – RTO # 32238 or Dawson's Training - RTO # 32461.
Prerequisites:
-
A short literacy and numeracy test may be required
What to Bring
-
Government Issued Photo ID
-
Enclosed shoes
-
Suitable outdoor work clothing (no singlets)
-
Lunch and water bottle
-
USI Number (Forgot My USI)
RIIENV301E - Conduct atmospheric monitoring
Overview
This unit of competency suits people who are required to conduct atmospheric monitoring in the resources and infrastructure industries. It applies to those working in supervisory and technical specialist roles. They generally work under minimal supervision to undertake a broad range of skilled applications in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.
Course Details
-
Course Location: Shed 1 / 5 Thomas Lane, Moranbah
-
Duration: 1 day
-
Course Times: Start at 7:00am
-
Assessment Type: Theory and Practical
If you are unable to attend due to illness, we will require a doctor's certificate/clearance to be able to reschedule your course. If you are unable to provide a doctor's clearance/certificate, then you may need to pay for your course again.
Students who are deemed competent will be issued a Statement of Attainment (SOA) by Queensland Training & Development Pty Ltd – RTO # 32238.
What to Bring
-
Government Issued Photo ID
-
Enclosed shoes
-
Suitable outdoor work clothing (no singlets)
-
Lunch and water bottle
-
USI Number (Forgot My USI)
MSMWHS201 - Conduct hazard analysis & MSMPER300 - Issue work permits
Overview
These units of competency cover the skills and knowledge required to conduct hazard analysis (such as job safety analysis (JSA), job hazard analysis (JHA), job safety and environmental analysis (JSEA), and safe work method statement (SWMS) and issue work permits.
This training covers an understanding of the permit system and the limitations of each permit and making decisions regarding the need for and correct use of each permit. This unit includes the issue of any and all permits. Permits are called ‘clearances’ by some organisations.
Course Details
-
Course Location: Shed 1 / 5 Thomas Lane, Moranbah
-
Duration: 1 day
-
Course Times: Start at 7:00am
-
Assessment Type: Theory and Practical
If you are unable to attend due to illness, we will require a doctor's certificate/clearance to be able to reschedule your course. If you are unable to provide a doctor's clearance/certificate, then you may need to pay for your course again.
Students who are deemed competent will be issued a Statement of Attainment (SOA) by Queensland Training & Development Pty Ltd – RTO # 32238.
What to Bring
-
Government Issued Photo ID
-
Enclosed shoes
-
Suitable outdoor work clothing (no singlets)
-
Lunch and water bottle
-
USI Number (Forgot My USI)
UETDREL006 - Work safely in the vicinity of live electrical apparatus as a non-electrical worker
Overview
This unit of competency will provide you with the necessary technical knowledge to safely work near overhead power line. At completion, each participant will be able to:
-
Identify statutory acts and regulations associated with working or operating vehicles/plant, equipment, and handheld tools near overhead power lines;
-
Identify hazards associated with working or operating vehicles/plant, equipment, and handheld tools near overhead power lines;
-
Identify various hardware and voltages in the Electricity Supply Industry (ESI) environment;
-
Identify relevant clearances for various voltages found in the ESI environment;
-
Identify correct selection and understanding of clearance tables relevant to the task being performed;
-
Identify correct emergency procedures associated with working or operating vehicles/plant, equipment, and handheld tools near overhead power lines.
Course Details
-
Course Location: Shed 1 / 5 Thomas Lane, Moranbah
-
Duration: 1 day
-
Course Times: Start at 7:00am
-
Assessment Type: Theory and Practical
If you are unable to attend due to illness, we will require a doctor's certificate/clearance to be able to reschedule your course. If you are unable to provide a doctor's clearance/certificate, then you may need to pay for your course again.
Students who are deemed competent will be issued a Statement of Attainment (SOA) by Queensland Training & Development Pty Ltd – RTO # 32238.
What to Bring
-
Government Issued Photo ID
-
Enclosed shoes
-
Suitable outdoor work clothing (no singlets)
-
Lunch and water bottle
-
USI Number (Forgot My USI)
HLTAID009 - Provide cardiopulmonary resuscitation & UETDRMP007 - Perform rescue from a live LV panel
Overview
HLTAID009 - Provide cardiopulmonary resuscitation
This unit describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) guidelines.
This unit applies to all persons who may be required to provide CPR, in a range of situations, including community and workplace settings.
Specific licensing/regulatory requirements relating to this competency, including requirements for refresher training should be obtained from the relevant national/state/territory Work Health and Safety Regulatory Authorities.
UETDRMP007 - Perform rescue from a live LV panel
This unit covers the performance of rescue procedures from live low voltage (LV) apparatus, not including overhead lines and underground cables in the workplace. It specifies the mandatory requirements of rescue from a live LV panel and how they apply in the context of transmission, distribution or rail work functions. It encompasses responsibilities for health, safety and risk management processes at all operative levels and adherence to safety practices as part of the normal way of doing work.
The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace subject to regulations for undertaking of electrical work.
Other conditions may apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
This combined course will enable you to comply with current WHS legislation and upon successful completion will receive a nationally recognised statement of attainment.
Course Details
-
Course Location: Shed 1 / 5 Thomas Lane, Moranbah
-
Duration: 1 day
-
Course Times: Start at 7:00am
-
Assessment Type: Theory and Practical
If you are unable to attend due to illness, we will require a doctor's certificate/clearance to be able to reschedule your course. If you are unable to provide a doctor's clearance/certificate, then you may need to pay for your course again.
Students who are deemed competent will be issued a Statement of Attainment (SOA) by Queensland Training & Development Pty Ltd – RTO # 32238.
Prerequisites:
-
UETDREL006 - Work safely in the vicinity of live electrical apparatus as a non-electrical worker
What to Bring
-
Government Issued Photo ID
-
Enclosed shoes
-
Suitable outdoor work clothing (no singlets)
-
Lunch and water bottle
-
USI Number (Forgot My USI)
Eluca Resources has a third-party non-RTO arrangement with:
Queensland Training & Development Pty Ltd – RTO # 32238
Dawsons Training - RTO # 32461
We recruit prospective students, provide enrolment forms, and conduct training and assessment on behalf of:
Queensland Training & Development Pty Ltd – RTO # 32238
Dawsons Training - RTO # 32461